TC EXTENDER 2001 ETH-2S
Langstrecken-Ethernet Extender
- Übertragen Ethernetdaten bis zu 20 km
- Automatische Erkennung der SHDSL-Datengeschwindigkeit
- Netzwerk-transparent (keine IP-Konfiguration erforderlich)
- Protokoll-transparent
Der TC EXTENDER erweitert die Ethernet-Datenübertragung transparent auf bis zu 20 km über eine Twisted Pair- (CAT5/6/7), Koaxial- oder eine beliebige bereits verlegte Kupferleitung, die zuvor in Alarmschaltkreisen, E1/T1-Schaltkreisen, RS232-, RS422-, RS485-, Überwachungskamera- und CATV-Anwendungen verwendet wurde.
Langstrecken-Ethernet Übertragung über Kupfer
SHDSL ist die bevorzugte Technologie für die Übertragung digitaler Daten über lange Kupferkabel eines Netzwerks hinweg. Obwohl die Leistung von den Eigenschaften des verwendeten Kabels abhängt, ist die Reichweite von SHDSL viel größer als bei anderen derzeit verfügbaren DSL-Technologien. Außerdem ist die Upload- und Download-Bandbreite symmetrisch und liefert Datengeschwindigkeiten von bis zu 15,3 Mb/s über 2-polige und 30 Mb/s über 4-polige Kupferdrähte.
Der TC EXTENDER ist protokolltransparent. Mit zwei SHDSL-Ports können Sie Punkt-zu-Punkt, lineare oder Ringnetzwerkstrukturen einfach mit Reichweiten von bis zu 20 km einrichten. Diese einfachen und effektiven Ethernet Extender eignen sich perfekt für industrielle Umgebungen, Geschäftsgebäude, Wohneinheiten, Krankenhausumgebungen, Vernetzung eines dezentralen Büros oder als private Hauptachse zu einem Geschäfts-LAN... überall, wo Sie Ethernet-Kommunikationsverbindungen zwischen separaten LANs oder LAN-Geräten (d. h. PCs, Digitalsensoren, VoIP-Telefone, WiFi-APs, IP-Kameras u.v.m.) benötigen.
Zwei durch Software konfigurierbare Digitalausgänge sind zur Erzeugung eines externen Gerätealarms verfügbar.
Für die Langstrecken-Ethernet-Datenübertragung mit “plug and play” ist der TC EXTENDER 2001 ETH-2S die ideale Lösung.
Langstrecken-Ethernet-Extender Features
- Robuste Modulationsmethode (SHDSL)
- Zukunftssicher (IPv4- und IPv6-kompatibel)
- Automatische Erkennung des Netzwerkkabeltyps (auto MDI(X))
- Automatische Netzwerkdatengeschwindigkeitserkennung (10/100 Mb/s)
- Einfache Einrichtung, Plug-and-Play
- Zwei Alarm- und Signalausgänge
Serial interface
Interface 1
Ethernet interface, 10/100Base-T(X) in acc. with IEEE 802.3u
Interface
Ethernet
Connection method
- RJ45 socket, shielded
- 1 port 10/100Base-T(X), auto negotiation
Transmission length
< 100 m (shielded twisted pair)
Protocols supported
Protocol-transparent for TCP/IP, IPv4, and IPv6
Serial transmission speed
10/100 Mbps, auto negotiation
Interface 2
SHDSL interface according to ITU-T G.991.2.bis
No. of channels
2 (2-wire operation)
Connection method
2 x 2-pos. COMBICON plug-in screw terminal blocks
Transmission length
< 20 km (Depending on data rate and cable cross section)
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Serial transmission speed
- 4-wire operation: 64 kbps ... 30 Mbps
- 2-wire operation: 32 kbps ... 15.3 Mbps
Interface 3
USB 2.0
Connection method
Mini-USB type B, 5-pos.
Transmission length
< 5 m (only for configuration and diagnostics)
Digital outputs
Output name
Digital output
Number of outputs
2
Voltage output signal
depending on the operating voltage
Current output signal
≤ 150 mA (Short-circuit-proof)
Connection method
2 x 2-pos. COMBICON plug-in screw terminal blocks
Behavior of the outputs
Deactivated for device supply via DIN rail connector
Function
Management
Plug and Play, diagnostics via PSI-CONF software or web-based management (only with managed Ethernet extenders)
Status and diagnostic indicators
- LEDs: US (supply voltage), ACT/LINK (Ethernet data traffic), ERR (errors)
- 2x LINK / 2x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages)
Ambient Conditions
Ambient temperature (operation)
-20°C ... 60°C (Freestanding (40 mm spacing to the right and left), no supply of other modules via the device)
-20°C ... 55°C (Mounted in rows with zero spacing and low power dissipation of aligned modules)
-20°C ... 50°C (Mounted in rows with zero spacing)
-20°C ... 45°C (Mounted in rows with zero spacing and supply of other modules via the device)
Ambient temperature (storage/transport)
-40°C ... 85°C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Altitude
5000 m (For restrictions see manufacturer's declaration)
Degree of protection
IP20
General
Electrical isolation
VCC // Ethernet // DSL (A) // DSL (B) // FE
Test voltage data interface/power supply
1.5 kVrms (50 Hz, 1 min.)
Standards/regulations
EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Net weight
258.7 g
Housing material
PA 6.6-FR
Color
gray
MTTF
- 711 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day))
- 308 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25 % (5 days a week, 12 hours a day))
- 125 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day))
Conformance
CE-compliant
Power supply
Nominal supply voltage
- 24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply)
- 5 V DC (configuration only, via mini-USB type B)
Supply voltage range
18 V DC ... 30 V DC
Typical current consumption
< 180 mA (24 V DC)
Connection method
COMBICON plug-in screw terminal block
Dimensions
Width
35 mm
Height
99 mm
Depth
114.5 mm
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
Reach and RoHS Compliant
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Vibration resistance
In acc. with EN 60068-2-6/IEC 60068-2-6
Result: 5g, 10...150 Hz, 2.5 h, in XYZ direction
Shock
In acc. with EN 60068-2-27/IEC 60068-2-27
Result: 15g
EMC Immunity
- EN 61000-4-2: Contact discharge ± 6 kV, Indirect discharge ± 6 kV
- EN 61000-4-3: Frequency range 80 MHz ... 3 GHz
- EN 61000-4-4: Criterion B
- EN 61000-4-5: Signal ± 1 kV (asymmetrical, shielded Ethernet cable)
- EN 55011
- EN 61000-4-6: Frequency range 0.15 MHz ... 80 MHz
- EN 50121-4
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
cULus listed UL 508
Approvals
- UL Listed
- cUL Listed
- ATEX
- cULus Listed
Commercial data
Packing unit
1
Weight per piece
0.0 g
Country of origin
Germany
Application Diagrams
Point-to-point connection
Line structure
Star structure
Redundant ring structure
The paths of the SHDSL ring should show a very high connection quality during normal operation. If that is not the case, the reaction time can deviate from the value calculated above.
Redundant data communication in rotating applications
Range
Figure 1: SHDSL data rate depending on the distance,2-wire
Calculation of SHDSL data rates using the PSI-SHDSL Calculator
Watch this tutorial you learn how to calculate the theoretical maximum data rate of an SHDSL line quick and easy with the software PSI-SHDSL Calculator. Overall, the software helps you to plan your project with more reliability.
Klicken Sie eine Artikelnummer um Bestellinformationen einzusehen.
Produktbild
Beschreibung
Netzkabel & Artikelnummer
TC EXTENDER 2001 ETH-2S - Long Range Ethernet Extender. 1 port 10/100Base-TX (RJ-45) . SHDSL via 4-pin terminal blocks. Links up to 20km - requires external DC power supply
TC EXTENDER 2001 ETH-2S - Long Range Ethernet Extender. 1 port 10/100Base-TX (RJ-45) . SHDSL via 4-pin terminal blocks. Links up to 20km – 24VDC, 18W USA wall power adapter with tinned leads included
TC EXTENDER 2001 ETH-2S - Long Range Ethernet Extender. 1 port 10/100Base-TX (RJ-45) . SHDSL via 4-pin terminal blocks. Links up to 20km – 24VDC, 18W UK wall power adapter with tinned leads included
TC EXTENDER 2001 ETH-2S - Long Range Ethernet Extender. 1 port 10/100Base-TX (RJ-45) . SHDSL via 4-pin terminal blocks. Links up to 20km – 24VDC, 18W EU wall power adapter with tinned leads included
Related Accessories
Accessory Image
Accessory Description
Part No.
AC US WALL MOUNT ADAPT TL 24VDC , 18W wall power adapter, with tinned leads - 0 to 60C. For use with TC EXTENDER, PSI-MOS Converters, PSM-ME Isolator, PSM-ME Converter and PSM-ME Repeater
AC UK WALL MOUNT ADAPT TL 24VDC , 18W wall power adapter with tinned leads - 0 to 60C. For use with TC EXTENDER, PSI-MOS Converters, PSM-ME Isolator, PSM-ME Converter and PSM-ME Repeater
AC EU WALL MOUNT ADAPT TL 24VDC, 18W wall power adapter with tinned leads - 0 to 60C. For use with TC EXTENDER, PSI-MOS Converters, PSM-ME Isolator, PSM-ME Converter and PSM-ME Repeater
DT-TELE-SHDSL Surge Protector - surge protection device for two SHDSL telecommunications interfaces (ports). Connection: RJ45 (RJ12/RJ11) and plug-in screw terminal block
Transmit power voltage across the bus. Gold-plated contacts with 2 parallel positions. UL 8A / cUL 6A, 150 V. Width 17.5cm. Carton of 10. For use with PSI-MOS Serial to Fiber Converters and PSI-MODEM-SHDSL/SERIAL Copper Extenders.
UNO-PS/1AC/24DC/60W DIN-Rail Power Supply: 24 VDC, 60 Watt with universal 85 to 264 VAC, -25 to 70°C extended operating temperature.
UNO-PS/1AC/24DC/150W Power Supply - DIN-Rail 24 VDC , 150 Watt power supply with universal 85 to 264 VAC, -25 to 70°C extended operating temperature
